The Active Sites of a Rod‐Shaped Hollandite DeNOx Catalyst

The identification of catalytically active sites (CASs) in heterogeneous catalysis is of vital importance to design and develop improved catalysts, but remains a great challenge. The CASs have been identified in the low‐temperature selective catalytic reduction of nitrogen oxides by ammonia (SCR) over a hollandite manganese oxide (HMO) catalyst with a rod‐shaped morphology and one‐dimensional tunnels. Electron microscopy and synchrotron X‐ray diffraction determine the surface and crystal structures of the one‐dimensional HMO rods closed by {100} side facets and {001} top facets. A combination of X‐ray absorption spectra, molecular probes with potassium and nitric oxide, and catalytic tests reveals that the CASs are located on the {100} side facets of the HMO rods rather than on the top facets or in the tunnels, and hence semi‐tunnel structural motifs on the {100} facets are evidenced to be the CASs of the SCR reaction. This work paves the way to further investigate the intrinsic mechanisms of SCR reactions.     

Engyodontochones,Antibiotic Polyketides from the Marine Fungus Engyodontium album Strain LF069

Six new ( 2 , 4 – 8 ) and two known polyketides with a basic structure of an anthraquinone‐xanthone were isolated from mycelia and culture broth of the fungus Engyodontium album strain LF069. The structures and relative configurations of these compounds were established by spectroscopic means, and their absolute configurations were defined mainly by comparison of quantum chemical TDDFT calculated and experimental ECD spectra. Compounds 2 and 4 – 8 were given the trivial names engyodontochone A ( 2 ) and B–F ( 4 – 8 ). Compounds 5 – 8 represent the first example of a 23,28 seco‐beticolin carbon skeleton. The relative and absolute configurations of two known substances JBIR‐97/98 ( 1 ) and JBIR‐99 ( 3 ) were determined for the first time. All isolated compounds were subjected to bioactivity assays. Compounds 1 – 4 exhibited inhibitory activity against methicillin‐resistant Staphylococcus aureus (MRSA) that was 10‐fold stronger than chloramphenicol.     

Computational Chemistry to the Rescue: Modern Toolboxes for the Assignment of Complex Molecules by GIAO NMR Calculations

The calculations of NMR properties of molecules using quantum chemical methods have deeply impacted several branches of organic chemistry. They are particularly important in structural or stereochemical assignments of organic compounds, with implications in total synthesis, stereoselective reactions, and natural products chemistry. In studying the evolution of the strategies developed to support (or reject) a structural proposal, it becomes clear that the most effective and accurate ones involve sophisticated procedures to correlate experimental and computational data. Owing to their relatively high mathematical complexity, such calculations (CP3, DP4, ANN‐PRA) are often carried out using additional computational resources provided by the authors (such as applets or Excel files). This Minireview will cover the state‐of‐the‐art of these toolboxes in the assignment of organic molecules, including mathematical definitions, updates, and discussion of relevant examples.     

Single Crystal to Single Crystal (SC‐to‐SC) Transformation from a Nonporous to Porous Metal–Organic Framework and Its Application Potential in Gas Adsorption and Suzuki Coupling Reaction through Postmodification

A new amino‐functionalized strontium–carboxylate‐based metal–organic framework (MOF) has been synthesized that undergoes single crystal to single crystal (SC‐to‐SC) transformation upon desolvation. Both structures have been characterized by single‐crystal X‐ray analysis. The desolvated structure shows an interesting 3D porous structure with pendent ?NH₂ groups inside the pore wall, whereas the solvated compound possesses a nonporous structure with DMF molecules on the metal centers. The amino group was postmodified through Schiff base condensation by pyridine‐2‐carboxaldehyde and palladium was anchored on that site. The modified framework has been utilized for the Suzuki cross‐coupling reaction. The compound shows high activity towards the C?C cross‐coupling reaction with good yields and turnover frequencies. Gas adsorption studies showed that the desolvated compound had permanent porosity and was microporous in nature with a BET surface area of 2052 m² g^?1. The material also possesses good CO₂ (8 wt %) and H₂ (1.87 wt %) adsorption capabilities.     

Synthesis,spectroscopic studies,thermal analyses,biological activity of tridentate-coordinated transition-metal complexes [M(L)X2] and crystal structure of [ZnBr2(2,6-bis(tert-butylthiomethyl)pyridine)]

A new terdentate acyclic pincer ligand, 2,6-bis(tert-butylthiomethyl)pyridine (tbtmp), was synthesized and reacted with several complexes of iron, zinc, nickel, cobalt, and copper. The ligand and its coordination compounds were characterized using elemental analysis, infrared, ¹H- and ¹³C-NMR-spectroscopy, thermal analyses, plus—for the Zn complex—single-crystal X-ray diffractometry. The structure of [Zn(L)Br₂] was solved in the tetragonal crystal system, chiral space groups P4₁2₁2 and P4₃2₁2 (No. 92 and No. 96, a = 947.2(1) pm, c = 2265.2(5) pm), revealing five-fold coordination of the metal atoms. According to spectroscopy, all complexes share the same coordination environment around the metal atoms, consisting of two halide anions and a sulfur-methylene-pyridine-methylene-sulfur entity; tbtmp acts as a tridentate ligand with the pyridine N atom and both tert-butylthio S atoms coordinating to the metal ions (NS2). The analysis results indicate that the metal ions are coordinated as distorted pseudo-bipyramids, LMX₂, with the chelate ligand meridionally arranged. One of the complexes contains ethanol as an additional ligand, resulting in a pseudo-octahedral coordination sphere [Ni(L)Cl₂EtOH]. The latter was obtained in the form of green crystals, which turn into a red powder with loss of the ethanol molecule. Fe (III), Co(II), Ni(II) and Cu(II) metal complexes [M(L)Cl₂] were screened for their antibacterial activity against B. subtilis G(+) and Escherichia coli G(−) bacteria, and fungus (Candida albicans and Aspergillus flavus).     

Controllable Electronic Structures and Photoinduced Processes of Bay‐Linked Perylenediimide Dimers and a Ferrocene‐Linked Triad

A series of perylene‐3,4,9,10‐bis(dicarboximide) (PDI) dimers linked through the bay regions was systematically synthesized to examine the electronic structures and photophysical properties in dependence on the distance and orientation between the two PDI units. The spectroscopic and electrochemical measurements suggested that the coupling value of a directly linked PDI dimer (PDI)₂ is much larger than those of para‐ and meta‐phenylene‐bridged PDI dimers p‐(PDI)₂ and m‐(PDI)₂. The width of Davydov splitting was quantitatively evaluated to compare the coupling values between the two PDI units in these dimers by absorption spectroscopy in frozen 2‐methyl‐THF. Excimer formation of PDI dimers induced the strong fluorescence quenching and large red‐shifts. Femtosecond transient absorption revealed a broad absorption derived from an excimer in the range from about 600 nm to the near‐IR region. The rate constants of formation and decay of the excimer are strongly dependent on the coupling values. Time‐resolved measurements on ferrocene‐linked p‐(PDI)₂ revealed a competition between the photoinduced processes of electron transfer and excimer formation in PhCN, which is in sharp contrast with the sole electron‐transfer process in toluene.     

Modified Lagrangian vortex method with improved boundary conditions for water waves past a thin bottom‐standing barrier

Herein, the modified Lagrangian vortex method (LVM), a hybrid analytical‐numerical algorithm per se, is devised to simulate the process of vortex formation and shedding from the sharp edge of a zero‐thickness vertical plate under linear water‐wave attack. Application of the Helmholtz decomposition facilitates a convenient switch between the inviscid‐ and viscous‐flow models, thereby enabling easy incorporation of vorticity effects into the potential‐flow calculations for the viscous‐dominated region. In evaluating the potential‐flow component, making good use of the quickly convergent technique with singular basis functions, correctly capturing the singular behavior in velocity fields near the tip of the plate, leads to a considerable reduction of computational burdens and to 12‐decimal‐place accuracy. The viscous correction is carried out via the meshless LVM with improved boundary conditions. Comparisons with previously published results show good agreement. Simulations of vortex generation and evolution illuminate the ability of the present method, and provide a supplement to pertinent experimental works. The hybrid scheme proposed herein allows flexibility for the former LVM and convenience in the code development. Such a compromise fits particularly well for the high‐resolution modeling of sharp‐edged vortex shedding without heavy numerical developments. Copyright © 2014 John Wiley & Sons, Ltd.     

Fabrication and microstructural characterization of functionally graded porous acrylonitrile butadiene styrene and the effect of cellular morphology on creep behavior

The ability to control material properties in space and time for functionally graded viscoelastic materials makes them an asset where they can be adapted to different design requirements. The continuous microstructure makes them advantageous over conventional composite materials. Functionally graded porous structures have the added advantage over conventional functionally graded materials of offering a significant weight reduction compared to a minor drop in strength. Functionally graded porous structures of acrylonitrile butadiene styrene (ABS) had been fabricated with a solid‐state constrained foaming process. Correlating the microstructure to material properties requires a deterministic analysis of the cellular structure. This is accomplished by analyzing the scanning electron microscopy images with a locally adaptive image threshold technique based on variational energy minimization. This characterization technique of the cellular morphology is analyst independent and works very well for porous structures. Inferences are drawn from the effect of processing on microstructure and then correlated to creep strain and creep compliance. Creep is strongly correlated to porosity and pore sizes but more associated to the size than to porosity. The results show the potential of controlling the cellular morphology and hence tailoring creep strain/compliance of ABS to some desired values. © 2015 Wiley Periodicals, Inc. J. Polym. Sci., Part B: Polym. Phys. 2015 , 53, 795–803     

Synthesis and Characterization of a New Metal-organic Framework with Nou Topology

A new compound, [H2N(CH3)2]2[Zn(btec)].H2O(1, H4 btec = 1,2,4,5-benzenetetracarboxylic acid) has been solvothermally synthesized and structurally characterized by singlecrystal X-ray diffraction. The crystal structure is of monoclinic, space group P21/c with a = 9.5741(3), b = 14.5044(4), c = 13.7329(5) , β = 100.582(4)°, V = 1874.61(10) 3, C14H20N2O9 Zn, Mr = 425.7, Z = 4, Dc = 1.387 g/cm3, μ = 1.349 mm-1, F(000) = 776, R = 0.0560 and w R = 0.1684 for 2834 observed reflections(I 2σ(I)). Compound 1 based on μ4-btec and tetrahedral building unit features a three-dimensional(3D) anionic framework with mixed connected nou topology. The luminescent property and thermogravimetric analysis of compound 1 are investigated.